A POD Approach for the Analysis of a Multi-Stream Heat Exchanger of a Cold Box: Comparison of two different Coefficient Approximations
A POD Approach for the Analysis of a Multi-Stream Heat Exchanger of a Cold Box: Comparison of two different Coefficient Approximations

Yasser Shafiei-alamooti; Ali Ashrafizadeh

Articles in Press, Corrected Proof, Available Online from 11 April 2023

https://doi.org/10.22108/gpj.2022.134406.1123

Abstract
  Two different coefficient approximation methods are implemented during a Proper Orthogonal Decomposition (POD) approach to analyze a Multi-Stream Heat Exchanger used in cold boxes. ...  Read More
Transparent Machine Learning Algorithm Offers Useful Prediction Method for Natural Gas Density
Transparent Machine Learning Algorithm Offers Useful Prediction Method for Natural Gas Density

David Wood; Abouzar Choubineh

Volume 6, Issue 2 , October 2018, , Pages 1-14

https://doi.org/10.22108/gpj.2018.112015.1035

Abstract
  Machine-learning algorithms aid predictions for complex systems with multiple influencing variables. However, many neural-network related algorithms behave as black boxes in terms of ...  Read More
CFD Simulation of a Wetted-Wall Column for Natural Gas Sweetening ‎Using DEA Solution
CFD Simulation of a Wetted-Wall Column for Natural Gas Sweetening ‎Using DEA Solution

Samaneh Bayati; Ali Mohebbi

Volume 5, Issue 2 , December 2017, , Pages 13-32

https://doi.org/10.22108/gpj.2018.108384.1019

Abstract
  Natural gas usually contains significant amounts of acid gases when it is extracted from underground reservoirs. Therefore, it must be treated by appropriate processes to remove these ...  Read More
Theoretical Study of Indirect Heating Temperature Swing Adsorption ‎in an Adsorbent Coated Finned Tube Heat Exchanger
Theoretical Study of Indirect Heating Temperature Swing Adsorption ‎in an Adsorbent Coated Finned Tube Heat Exchanger

Mohsen Gholami

Volume 5, Issue 1 , January 2017, , Pages 55-64

https://doi.org/10.22108/gpj.2018.106498.1017

Abstract
  In this study, the performance of an adsorbent coated finned tube exchanger for carbon capture was investigated numerically. The results showed that this structure has a great potential ...  Read More
Predictive Control of Gas Injection in Natural Gas Transport Networks
Predictive Control of Gas Injection in Natural Gas Transport Networks

Mohammad Ali Fanaei; Shahram Zahed Rahimi

Volume 3, Issue 2 , October 2015, , Pages 45-54

https://doi.org/10.22108/gpj.2015.20405

Abstract
  The present sought to draw a comparison between Model Predictive Control performance and two other controllers named Simple PI and Selective PI in controlling large-scale natural gas ...  Read More
A Study on Performance of Solid Oxide Fuel Cell-Stirling Engine Cycle Combined System- Part I: SOFC Simulation by Programming in Matlab and Modeling in Hysys
A Study on Performance of Solid Oxide Fuel Cell-Stirling Engine Cycle Combined System- Part I: SOFC Simulation by Programming in Matlab and Modeling in Hysys

Mohammad-Ali Ramezani; Majid Amidpour; Mohammad Najafi; Majid Abbaspour

Volume 3, Issue 2 , October 2015, , Pages 55-70

https://doi.org/10.22108/gpj.2015.20406

Abstract
  In recent years, using new methods in utilization of energy resources has become necessary due to environmental pollution and restriction of energy resources. The hybrid system presented ...  Read More
A New Correlation Based on Multi-Gene Genetic Programming for Predicting the Sweet Natural Gas Compressibility Factor
A New Correlation Based on Multi-Gene Genetic Programming for Predicting the Sweet Natural Gas Compressibility Factor

Hossein Kaydani; Ali Mohebbi; Mohammad Hassan Saffaripour

Volume 3, Issue 1 , January 2015, , Pages 41-50

https://doi.org/10.22108/gpj.2015.21068

Abstract
  Gas compressibility factor (z-factor) is an important parameter widely applied in petroleum and chemical engineering. Experimental measurements, equations of state (EOSs) and empirical ...  Read More
Mathematical Modeling of Gas Adsorption Processes in Packed Bed: The Role of Numerical Methods on Computation Time
Mathematical Modeling of Gas Adsorption Processes in Packed Bed: The Role of Numerical Methods on Computation Time

Maryam Mashayekhpour; Mohammadreza Talaie

Volume 2, Issue 2 , February 2014, , Pages 23-38

https://doi.org/10.22108/gpj.2014.20176

Abstract
  Rigorous mathematical modeling of adsorption processes in packed beds involves time-consuming computations which are considered as the fundamental weakness of such thorough mathematical ...  Read More
Modeling the Solubility of Acid Gases in Ionic Liquids
Modeling the Solubility of Acid Gases in Ionic Liquids

Cyrus Ghotbi; Mohammadali Safavi; Maryam Tavakolmoghadam

Volume 2, Issue 2 , February 2014, , Pages 53-66

https://doi.org/10.22108/gpj.2014.20178

Abstract
  In this work, the PC-SAFT equation of state (EoS) has been used to model the solubility of acid gases (CO2 and H2S) in two imidazolium-based ionic liquids (ILs) ([C8-mim][PF6] and [C8-mim][Tf2N]). ...  Read More
An Effective Iterative Algorithm for Modeling of Multicomponent Gas Separation in a Countercurrent Membrane Permeator
An Effective Iterative Algorithm for Modeling of Multicomponent Gas Separation in a Countercurrent Membrane Permeator

Masoumeh Moheb Shahrestani; Amir Rahimi

Volume 2, Issue 1 , January 2014, , Pages 19-31

https://doi.org/10.22108/gpj.2014.20172

Abstract
   A model is developed for separation of multicomponent gas mixtures in a countercurrent hollow fiber membrane module. While the model’s solution in countercurrent ...  Read More
The Mathematical Method and Thermodynamic Approaches to Design Multi-Component Refrigeration used in Cryogenic Process Part II: Optimal Arrangement
The Mathematical Method and Thermodynamic Approaches to Design Multi-Component Refrigeration used in Cryogenic Process Part II: Optimal Arrangement

Mostafa Mafi; Bahram Ghorbani; Gholam Reza Salehi; Majid Amidpour; Seyed Mojtaba Mousavi Nayenian

Volume 2, Issue 1 , January 2014, , Pages 32-39

https://doi.org/10.22108/gpj.2014.20398

Abstract
    A refrigeration cycle is a chain of various pieces of equipment including compressors, condensers, evaporators, and expansion devices each of which takes on a particular thermodynamic ...  Read More
Experimental Measurement and Kinetic Modeling of Ethane Gas Hydrate in the Presence of Sodium Dodecyl Sulfate Surfactant
Experimental Measurement and Kinetic Modeling of Ethane Gas Hydrate in the Presence of Sodium Dodecyl Sulfate Surfactant

Maryam Karamoddin; Farshad Varaminian; Maryam Daraee

Volume 1, Issue 2 , April 2013, , Pages 1-12

https://doi.org/10.22108/gpj.2013.20164

Abstract
    Abstract: In this work, the kinetics of ethane hydrate formation has been studied experimentally and a kinetic model based on chemical affinity has been described for ...  Read More
Mathematical Method and Thermodynamic Approaches to Design Multi-Component Refrigeration Used in Cryogenic Process Part I: Optimal Operating Conditions
Mathematical Method and Thermodynamic Approaches to Design Multi-Component Refrigeration Used in Cryogenic Process Part I: Optimal Operating Conditions

Mostafa Mafi; Majid Amidpour; Mojtaba Nayenian; Gholam Reza Salehi; Bahram Ghorbani

Volume 1, Issue 2 , April 2013, , Pages 13-21

https://doi.org/10.22108/gpj.2013.20165

Abstract
  Abstract: Minimizing the work consumed in refrigeration system is the most effective measure to reduce the cost of products in sub-ambient chemical processes. The introduction of mixed ...  Read More
Investigating the Performance of Amine-Grafted Silica-Base Adsorbents in CO2 Removal from a Natural Gas Stream Using a Diffusion Based Mathematical Model
Investigating the Performance of Amine-Grafted Silica-Base Adsorbents in CO2 Removal from a Natural Gas Stream Using a Diffusion Based Mathematical Model

Foad Aghamiri; Mohammad Reza Talaie; Mohsen Gholami

Volume 1, Issue 2 , April 2013, , Pages 22-30

https://doi.org/10.22108/gpj.2013.20167

Abstract
  Abstract:  In this study adiffusion based mathematical model was developed to compare the performance of amine-grafted adsorbents with that of 13X zeolite in a fixed-bed ...  Read More
Distillation Column Identification Using Artificial Neural Network
Distillation Column Identification Using Artificial Neural Network

Majid Amidpour; Gholam Reza Salehi; Ali Ghaffari; Hamed Sahraei

Volume 1, Issue 2 , April 2013, , Pages 31-40

https://doi.org/10.22108/gpj.2013.20166

Abstract
    Abstract: In this paper, Artificial Neural Network (ANN) was used for modeling the nonlinear structure of a debutanizer column in a refinery gas process plant. The actual ...  Read More
Optimization of Distillation Column Operation by Simulated Annealing
Optimization of Distillation Column Operation by Simulated Annealing

Gholam Reza Salehi; Majid Amidpour; Amir Salehi; Mostafa Maleki; Bahram Ghorbani

Volume 1, Issue 2 , April 2013, , Pages 49-63

https://doi.org/10.22108/gpj.2013.20169

Abstract
  Abstract: In this paper, an exergy analysis approach is proposed for optimal design of distillation column by using simulated annealing algorithm. First, the simulation of a distillation ...  Read More
The Design of the Best Heat Integrated Separation Systems Using Harmony Search Algorithm
The Design of the Best Heat Integrated Separation Systems Using Harmony Search Algorithm

Gholam Reza Salehi; Majid Amidpour; Bahram Ghorbani; Kazem Hasanzadeh Lashkajani

Volume 1, Issue 1 , January 2013, , Pages 19-40

https://doi.org/10.22108/gpj.2013.20162

Abstract
  The synthesis of heat integrated multi-component distillation systems is complex due to its huge search space for structural combination and optimization computation. To provide a systematic ...  Read More
The Indication of Two-Phase Flow Pattern and Slug Characteristics in a Pipeline Using CFD Method
The Indication of Two-Phase Flow Pattern and Slug Characteristics in a Pipeline Using CFD Method

Elahe Bahramifar; Rahbar Rahimi; Maryam Mazarei Sotoodeh

Volume 1, Issue 1 , January 2013, , Pages 70-87

https://doi.org/10.22108/gpj.2013.20159

Abstract
  Multiphase flows are commonly encountered in oil and gas industries. The transport of multiphase flow causes the formation of slug, the increase of pressure drop and the possibility ...  Read More