Keyword Index

A

  • Acid Gas Enrichment Modeling and Optimization of Different Acid Gas Enrichment Structures via Coupling of Response Surface Method with Genetic Algorithm [Volume 9, Issue 1, 2021, Pages 157-172]
  • Aspen HYSYS Applicability of the common equations of state for modeling hydrogen liquefaction processes in Aspen HYSYS [Volume 9, Issue 1, 2021, Pages 11-28]

B

  • Biogas reformer Thermodynamic evaluation of a novel solar-aided biogas polygeneration system integrated with steam network etwork [Volume 9, Issue 1, 2021, Pages 141-156]
  • Biomass Thermodynamic evaluation and optimization of a cogeneration energy system integrated with steam network [Volume 9, Issue 2, 2021, Pages 1-14]

C

  • Carbon capture and storage Thermodynamic evaluation of a novel solar-aided biogas polygeneration system integrated with steam network etwork [Volume 9, Issue 1, 2021, Pages 141-156]
  • Centrifugal compressor Influence of specific heat capacity ratio on the optimum design of the leading edge of centrifugal compressor impeller considering the presence of IGV [Volume 9, Issue 2, 2021, Pages 103-112]
  • CFD CFD simulation of an industrial gas condensate electrostatic desalter: a case study [Volume 9, Issue 2, 2021, Pages 131-148]
  • CLM baseline Environmental impact investigation of natural gas refinery process based on LCA CML-IA baseline method [Volume 9, Issue 2, 2021, Pages 53-60]
  • Cogeneration Thermodynamic evaluation and optimization of a cogeneration energy system integrated with steam network [Volume 9, Issue 2, 2021, Pages 1-14]
  • Cogeneration Thermodynamic evaluation of a novel solar-aided biogas polygeneration system integrated with steam network etwork [Volume 9, Issue 1, 2021, Pages 141-156]

D

  • Desalination Energy and Environmental Comparison of Different Scenarios for Cogeneration of Power and Desalinated Water in Iran [Volume 9, Issue 1, 2021, Pages 29-42]
  • Diesel-gasoline combustion simulation Evaluation of the Effects of Diesel Fuel Injection Timing in a High-Speed RCCI Engine at Low to High Load Conditions [Volume 9, Issue 1, 2021, Pages 73-90]
  • Diesel injection timing Evaluation of the Effects of Diesel Fuel Injection Timing in a High-Speed RCCI Engine at Low to High Load Conditions [Volume 9, Issue 1, 2021, Pages 73-90]
  • Distillation Effect of Operational and Structural Parameters in Dividing Wall Column Distillation Energy Efficiency for Separation of Methanol, Isopropanol, and N-Butanol [Volume 9, Issue 1, 2021, Pages 109-140]
  • Dividing Wall Column (DWC) Effect of Operational and Structural Parameters in Dividing Wall Column Distillation Energy Efficiency for Separation of Methanol, Isopropanol, and N-Butanol [Volume 9, Issue 1, 2021, Pages 109-140]
  • Droplet coalescence CFD simulation of an industrial gas condensate electrostatic desalter: a case study [Volume 9, Issue 2, 2021, Pages 131-148]

E

  • Economy Analysis Genetic algorithm optimization of two natural gas liquefaction methods based on energy, exergy, and economy analyses: the case study of Shahid Rajaee power plant peak-shaving system [Volume 9, Issue 1, 2021, Pages 91-108]
  • Efficiency Energy, exergy and economic analysis of a hydrogen liquefaction process integrated with a PRICO cycle [Volume 9, Issue 2, 2021, Pages 83-102]
  • Electrostatic desalter CFD simulation of an industrial gas condensate electrostatic desalter: a case study [Volume 9, Issue 2, 2021, Pages 131-148]
  • Energy Analysis Energy, exergy and economic analysis of a hydrogen liquefaction process integrated with a PRICO cycle [Volume 9, Issue 2, 2021, Pages 83-102]
  • Energy Efficiency Effect of Operational and Structural Parameters in Dividing Wall Column Distillation Energy Efficiency for Separation of Methanol, Isopropanol, and N-Butanol [Volume 9, Issue 1, 2021, Pages 109-140]
  • Environmental analysis Energy and Environmental Comparison of Different Scenarios for Cogeneration of Power and Desalinated Water in Iran [Volume 9, Issue 1, 2021, Pages 29-42]
  • Environmental Flow Diagram Techno-Economic and Environmental Evaluation of Expansion Turbines for Gas Field Improvement (Case study) [Volume 9, Issue 1, 2021, Pages 1-10]
  • Environmental Impact Assessment Environmental impact investigation of natural gas refinery process based on LCA CML-IA baseline method [Volume 9, Issue 2, 2021, Pages 53-60]
  • Equation of state Applicability of the common equations of state for modeling hydrogen liquefaction processes in Aspen HYSYS [Volume 9, Issue 1, 2021, Pages 11-28]
  • Eulerian-Eulerian two-phase method CFD simulation of an industrial gas condensate electrostatic desalter: a case study [Volume 9, Issue 2, 2021, Pages 131-148]
  • Exergy Analysis Genetic algorithm optimization of two natural gas liquefaction methods based on energy, exergy, and economy analyses: the case study of Shahid Rajaee power plant peak-shaving system [Volume 9, Issue 1, 2021, Pages 91-108]
  • Exergy Analysis Energy, exergy and economic analysis of a hydrogen liquefaction process integrated with a PRICO cycle [Volume 9, Issue 2, 2021, Pages 83-102]
  • Expansion Turbine Techno-Economic and Environmental Evaluation of Expansion Turbines for Gas Field Improvement (Case study) [Volume 9, Issue 1, 2021, Pages 1-10]

F

  • Flare Gas Techno-Economic and Environmental Evaluation of Expansion Turbines for Gas Field Improvement (Case study) [Volume 9, Issue 1, 2021, Pages 1-10]
  • Furnace The Numerical Simulation of Olefin Production Furnace for Pollution Reduction: Two case studies [Volume 9, Issue 2, 2021, Pages 15-32]

G

  • Gas hydrates A kinetic study of methane hydrate formation in the presence of ionic liquids and poly(N-vinylcaprolactam) [Volume 9, Issue 1, 2021, Pages 43-50]
  • Gasification Thermodynamic evaluation and optimization of a cogeneration energy system integrated with steam network [Volume 9, Issue 2, 2021, Pages 1-14]
  • Genetic Algorithm Modeling and Optimization of Different Acid Gas Enrichment Structures via Coupling of Response Surface Method with Genetic Algorithm [Volume 9, Issue 1, 2021, Pages 157-172]

H

  • Heat capacity ratio Influence of specific heat capacity ratio on the optimum design of the leading edge of centrifugal compressor impeller considering the presence of IGV [Volume 9, Issue 2, 2021, Pages 103-112]
  • Heat Recovery Exergoeconomic and Exergoenvironmental Evaluation of a Turbo-Compressor Station using Solar Energy and Exhaust Gas Heat Recovery [Volume 9, Issue 2, 2021, Pages 113-130]
  • Heavy-Duty Diesel Engine Multi-Objective Optimization of a RCCI Engine Fueled with Diesel Fuel and Natural Gas Enriched with Hydrogen [Volume 9, Issue 2, 2021, Pages 33-42]
  • High-speed diesel engine Evaluation of the Effects of Diesel Fuel Injection Timing in a High-Speed RCCI Engine at Low to High Load Conditions [Volume 9, Issue 1, 2021, Pages 73-90]
  • Hydrogen Multi-Objective Optimization of a RCCI Engine Fueled with Diesel Fuel and Natural Gas Enriched with Hydrogen [Volume 9, Issue 2, 2021, Pages 33-42]
  • Hydrogen Energy, exergy and economic analysis of a hydrogen liquefaction process integrated with a PRICO cycle [Volume 9, Issue 2, 2021, Pages 83-102]
  • Hydrogen Liquefaction Applicability of the common equations of state for modeling hydrogen liquefaction processes in Aspen HYSYS [Volume 9, Issue 1, 2021, Pages 11-28]

I

  • Induction time A kinetic study of methane hydrate formation in the presence of ionic liquids and poly(N-vinylcaprolactam) [Volume 9, Issue 1, 2021, Pages 43-50]
  • Inlet guide vanes Influence of specific heat capacity ratio on the optimum design of the leading edge of centrifugal compressor impeller considering the presence of IGV [Volume 9, Issue 2, 2021, Pages 103-112]
  • Ionic liquids A kinetic study of methane hydrate formation in the presence of ionic liquids and poly(N-vinylcaprolactam) [Volume 9, Issue 1, 2021, Pages 43-50]

K

  • Kinetic modeling A kinetic study of methane hydrate formation in the presence of ionic liquids and poly(N-vinylcaprolactam) [Volume 9, Issue 1, 2021, Pages 43-50]

L

  • Life Cycle Environmental impact investigation of natural gas refinery process based on LCA CML-IA baseline method [Volume 9, Issue 2, 2021, Pages 53-60]
  • LNG Genetic algorithm optimization of two natural gas liquefaction methods based on energy, exergy, and economy analyses: the case study of Shahid Rajaee power plant peak-shaving system [Volume 9, Issue 1, 2021, Pages 91-108]

M

  • Mach number Influence of specific heat capacity ratio on the optimum design of the leading edge of centrifugal compressor impeller considering the presence of IGV [Volume 9, Issue 2, 2021, Pages 103-112]
  • Mixed Refrigerant Genetic algorithm optimization of two natural gas liquefaction methods based on energy, exergy, and economy analyses: the case study of Shahid Rajaee power plant peak-shaving system [Volume 9, Issue 1, 2021, Pages 91-108]
  • Modified- Benedict–Webb–Rubin Applicability of the common equations of state for modeling hydrogen liquefaction processes in Aspen HYSYS [Volume 9, Issue 1, 2021, Pages 11-28]

N

  • Natural gas Environmental impact investigation of natural gas refinery process based on LCA CML-IA baseline method [Volume 9, Issue 2, 2021, Pages 53-60]
  • Net annual profit Energy and Environmental Comparison of Different Scenarios for Cogeneration of Power and Desalinated Water in Iran [Volume 9, Issue 1, 2021, Pages 29-42]
  • Neural Network Modeling and Optimization of Different Acid Gas Enrichment Structures via Coupling of Response Surface Method with Genetic Algorithm [Volume 9, Issue 1, 2021, Pages 157-172]
  • NGL plant Retrofit design of an industrial natural gas liquids recovery process based on the pinch technology concept [Volume 9, Issue 1, 2021, Pages 51-72]
  • Numerical Simulation The Numerical Simulation of Olefin Production Furnace for Pollution Reduction: Two case studies [Volume 9, Issue 2, 2021, Pages 15-32]

O

  • Olefin The Numerical Simulation of Olefin Production Furnace for Pollution Reduction: Two case studies [Volume 9, Issue 2, 2021, Pages 15-32]
  • Optimization Multi-Objective Optimization of a RCCI Engine Fueled with Diesel Fuel and Natural Gas Enriched with Hydrogen [Volume 9, Issue 2, 2021, Pages 33-42]
  • Optimum inlet Influence of specific heat capacity ratio on the optimum design of the leading edge of centrifugal compressor impeller considering the presence of IGV [Volume 9, Issue 2, 2021, Pages 103-112]

P

  • Peak-shaving Genetic algorithm optimization of two natural gas liquefaction methods based on energy, exergy, and economy analyses: the case study of Shahid Rajaee power plant peak-shaving system [Volume 9, Issue 1, 2021, Pages 91-108]
  • PEM electrolyzer Investigating a novel propulsion system for unmanned aerial vehicle equipped with PEM electrolyzer, PEM fuel cell, and hydrogen and oxygen storage tanks, using photovoltaic panel as renewable energy [Volume 9, Issue 2, 2021, Pages 61-82]
  • PEM fuel cell Investigating a novel propulsion system for unmanned aerial vehicle equipped with PEM electrolyzer, PEM fuel cell, and hydrogen and oxygen storage tanks, using photovoltaic panel as renewable energy [Volume 9, Issue 2, 2021, Pages 61-82]
  • Pinch Analysis Retrofit design of an industrial natural gas liquids recovery process based on the pinch technology concept [Volume 9, Issue 1, 2021, Pages 51-72]
  • Pipeline Gas Station Exergoeconomic and Exergoenvironmental Evaluation of a Turbo-Compressor Station using Solar Energy and Exhaust Gas Heat Recovery [Volume 9, Issue 2, 2021, Pages 113-130]
  • Pollution Environmental impact investigation of natural gas refinery process based on LCA CML-IA baseline method [Volume 9, Issue 2, 2021, Pages 53-60]
  • Population balance model CFD simulation of an industrial gas condensate electrostatic desalter: a case study [Volume 9, Issue 2, 2021, Pages 131-148]
  • Power and water cost Energy and Environmental Comparison of Different Scenarios for Cogeneration of Power and Desalinated Water in Iran [Volume 9, Issue 1, 2021, Pages 29-42]
  • Process integration Energy, exergy and economic analysis of a hydrogen liquefaction process integrated with a PRICO cycle [Volume 9, Issue 2, 2021, Pages 83-102]

R

  • RCCI Evaluation of the Effects of Diesel Fuel Injection Timing in a High-Speed RCCI Engine at Low to High Load Conditions [Volume 9, Issue 1, 2021, Pages 73-90]
  • RCCI combustion Multi-Objective Optimization of a RCCI Engine Fueled with Diesel Fuel and Natural Gas Enriched with Hydrogen [Volume 9, Issue 2, 2021, Pages 33-42]
  • Reactor The Numerical Simulation of Olefin Production Furnace for Pollution Reduction: Two case studies [Volume 9, Issue 2, 2021, Pages 15-32]
  • Refinery Environmental impact investigation of natural gas refinery process based on LCA CML-IA baseline method [Volume 9, Issue 2, 2021, Pages 53-60]
  • REFPROP Applicability of the common equations of state for modeling hydrogen liquefaction processes in Aspen HYSYS [Volume 9, Issue 1, 2021, Pages 11-28]
  • Response surface method Modeling and Optimization of Different Acid Gas Enrichment Structures via Coupling of Response Surface Method with Genetic Algorithm [Volume 9, Issue 1, 2021, Pages 157-172]
  • Retrofit analysis Retrofit design of an industrial natural gas liquids recovery process based on the pinch technology concept [Volume 9, Issue 1, 2021, Pages 51-72]

S

  • Self-refrigeration method Retrofit design of an industrial natural gas liquids recovery process based on the pinch technology concept [Volume 9, Issue 1, 2021, Pages 51-72]
  • Simulation Techno-Economic and Environmental Evaluation of Expansion Turbines for Gas Field Improvement (Case study) [Volume 9, Issue 1, 2021, Pages 1-10]
  • SO2 emissions Modeling and Optimization of Different Acid Gas Enrichment Structures via Coupling of Response Surface Method with Genetic Algorithm [Volume 9, Issue 1, 2021, Pages 157-172]
  • SOFC Thermodynamic evaluation and optimization of a cogeneration energy system integrated with steam network [Volume 9, Issue 2, 2021, Pages 1-14]
  • Solar Energy Thermodynamic evaluation of a novel solar-aided biogas polygeneration system integrated with steam network etwork [Volume 9, Issue 1, 2021, Pages 141-156]
  • Solar Energy Exergoeconomic and Exergoenvironmental Evaluation of a Turbo-Compressor Station using Solar Energy and Exhaust Gas Heat Recovery [Volume 9, Issue 2, 2021, Pages 113-130]
  • Solar photovoltaic panel Investigating a novel propulsion system for unmanned aerial vehicle equipped with PEM electrolyzer, PEM fuel cell, and hydrogen and oxygen storage tanks, using photovoltaic panel as renewable energy [Volume 9, Issue 2, 2021, Pages 61-82]
  • Specific Gravity Effective Parameters on Oil Production Rate using Artificial Gas Lift: Case Study in the One of South Iranian Oil Fields [Volume 9, Issue 2, 2021, Pages 43-52]
  • Steam network Thermodynamic evaluation and optimization of a cogeneration energy system integrated with steam network [Volume 9, Issue 2, 2021, Pages 1-14]
  • Steam network Thermodynamic evaluation of a novel solar-aided biogas polygeneration system integrated with steam network etwork [Volume 9, Issue 1, 2021, Pages 141-156]

T

  • Temperature Effective Parameters on Oil Production Rate using Artificial Gas Lift: Case Study in the One of South Iranian Oil Fields [Volume 9, Issue 2, 2021, Pages 43-52]
  • Thermal Cracking The Numerical Simulation of Olefin Production Furnace for Pollution Reduction: Two case studies [Volume 9, Issue 2, 2021, Pages 15-32]
  • Thermal Efficiency Evaluation of the Effects of Diesel Fuel Injection Timing in a High-Speed RCCI Engine at Low to High Load Conditions [Volume 9, Issue 1, 2021, Pages 73-90]
  • Thermodynamic and economic comparison Energy and Environmental Comparison of Different Scenarios for Cogeneration of Power and Desalinated Water in Iran [Volume 9, Issue 1, 2021, Pages 29-42]
  • Tubing Diameter Effective Parameters on Oil Production Rate using Artificial Gas Lift: Case Study in the One of South Iranian Oil Fields [Volume 9, Issue 2, 2021, Pages 43-52]
  • Turbo-compressor Exergoeconomic and Exergoenvironmental Evaluation of a Turbo-Compressor Station using Solar Energy and Exhaust Gas Heat Recovery [Volume 9, Issue 2, 2021, Pages 113-130]

U

  • Unmanned aerial vehicle Investigating a novel propulsion system for unmanned aerial vehicle equipped with PEM electrolyzer, PEM fuel cell, and hydrogen and oxygen storage tanks, using photovoltaic panel as renewable energy [Volume 9, Issue 2, 2021, Pages 61-82]
  • Upgrading Effect of Operational and Structural Parameters in Dividing Wall Column Distillation Energy Efficiency for Separation of Methanol, Isopropanol, and N-Butanol [Volume 9, Issue 1, 2021, Pages 109-140]